Release date:June, 2022
‎​

Table of contents

Updated Components

Cyber Protection agent

The Acronis Cyber Protection agent has new versions as follows.

  • Acronis Cyber Protection Agent for Windows (v.15.0.29896)
  • Acronis Cyber Protection Agent for Mac (v.15.0.29896)
  • Acronis Cyber Protection Agent for Linux (v.15.0.29896)

See the release notes for the Acronis Cyber Protection agent here.

Fixed issues

This section describes issues that have been fixed in this update.

Acronis Cyber Protect Cloud

Common

  • [PLTFRM-41229] Backups are failing with an error message "The cloud storage quota is exceeded for <user_name>. Further backups will fail".
  • [ABR-349507] Some workloads stopped displaying in the Cyber Protection console after update to Acronis Cyber Protect Cloud 22.06.
  • [ABR-350583] Microsoft Exchange tab is shown empty in Cyber Protection console after update to Acronis Cyber Protect Cloud 22.06.

Cyber Protection Agent

  • [ABR-349135] Agent update is failing with error "Internal error of the installation or update support service. Error: UnexpectedInstallerStop".

Dashboards and reports

  • [ADP-21951] Unit users can see customer-level information in the Dashboard widgets in some cases.

Security and management

  • [PLTFRM-41352] Scheduled malware scan got stuck in activities and did not complete.
  • [ADP-22191] Unexpected update of a machine with Windows 10 Pro to Windows 11 Pro when the patch had status "declined" set by user.

Management Portal and Platform Core

  • [PLTFRM-40825] Turning on the Immutable storage setting fails with error "No compatible storages found. To enable immutable storage, upgrade the storages to version 4.7 or later".
  • [PLTFRM-41151] Automatic switch from trial mode to production mode failed for a customer.

Known issues and limitations

This section describes issues that are currently known and provides solutions to avoid the issues where possible.

Acronis Cyber Protect Cloud

  • Common

    • [ABR-228827] If some backup is removed via the Data Recovery (Web Restore) console, this change is not reflected in the service console while browsing the backup location, until the service console is refreshed.
    • [ABR-196710] The backup location on the network share usage is duplicated in the case when there is a different network share with the same name registered as a backup location (shares rotation scenario).
    • [ABR-189620] The "Activities summary" widget shows activities out of the defined date "Range" scope (excessive activities may be shown).
    • [ABR-184900] Local backup usage is not reported for backups stored on a network share with enabled deduplication.
    • [ABR-183764] Local backup usage is not updated for all virtual machine backups after deleting and re-adding a network location.
    • [ABR-182313] Local backup usage size is duplicated after reconnecting a locally attached storage (LAS) to a new Agent for VMware (Virtual Appliance).
    • [ABR-178648] The installer does not remove/update old libraries if the previous update was interrupted.
    • [ABR-154655] The protection plan may have the "Backup succeeded" status, even if this plan is completed with warnings. Alerts and activities still show the proper status of the plan.
    • [ABR-190404] It is not possible to recover from the Large Scale Recovery backup produced by the "LSR" tool if the backup is split into multiple separate files (multi-volume).
    • [ABR-158677] "Intel(R) 82574L Gigabit Network Connection" NIC is not properly recognized by Windows 10 after recovery of an image to a VMware Workstation virtual machine by using the bootable media.
    • [ADP-17122] Backups Scanning does not work properly with orphaned archives.
  • Cyber Protection Agent

    • [ABR-87244] File-level recovery from a disk/volume backup of NTFS volumes with the enabled native deduplication does not work.
  • macOS protection

    • [ABR-207057] The Bulgarian language is missing in the "Recovery HD" menu (bootable media for Mac), due to a lack of support of the Bulgarian language in macOS.
    • [ABR-141823] There are incorrect backup items in a protection plan after updating Mac OS X to 10.13 High Sierra with conversion from HFS+ to APFS (some backup items are missing).
    • [ABR-137886] Backing up Mac with Apple RAID configured fails with the "No volumes were found when processing the 'Fixed Volumes' template" error. Apple RAIDs are not supported.
    • [ABR-115270] The "[All Profiles Folder]" template in a file level backup does not support a custom profile path.
  • Microsoft 365, Google Workspace and other applications protection

    • [ABR-74984] The "Next backup" time is not displayed for a machine that has only application-level protection plans applied to it.

    • [PLTFRM-18969] It is not possible to protect Microsoft SQL on a machine with a workstation operating system, in the case Agent for Hyper-V is also installed among local agents.

    • [ABR-255521] The number of total runs and successful runs is zero for the Microsoft Office 365 resources.

  • Virtualization protection

    • [ABR-320237] Debian 10 EFI VM with enabled Secure Boot is not bootable after recovery of backup captured from VMware ESXi to VM on Scale Computing HC3
      • Solution: disable Secure Boot in EFI boot manager configuration after recovery
    • [ABR-320149] Recovery of backup for machine which contains a mix of IDE and SCSI drives, to Scale Computing VM, produces a VM which misses 1 disk (non-system SCSI disk is not restored)
    • [ABR-242166] An application-aware backup of a Hyper-V virtual machine may fail when executing the WMI query, with the "WMI 'ExecQuery' failed executing query." or "Failed to create a new process via WMI" errors, when the backup is performed on a host under a high load, due to no response from WMI.
    • [ABR-235983] A protection plan using policy rules such as "/dev/sdaX" or "/sdaX" applied to a VMware or Hyper-V virtual machine fails with the "Nothing to back up. The operation has been terminated." error, when performed by Agent for VMware/Hyper-V.
    • [ABR-234935] There are duplicated activities in the Activities summary, after the backup of a virtual machine running on a Hyper-V cluster.
    • [ABR-234935] An incorrect number of Total runs/Number of successful runs for a Hyper-V cluster is shown on the Operations tab.
    • [ABR-234935] The number of email notifications is equal to the number of Hyper-V cluster nodes for one VM backup activity.
    • [ABR-192213] VMware virtual machines with an empty "vc.uuid" (InstanceUUID) vSphere property are not listed in the service console.
    • [ABR-189882] Backup of a Hyper-V virtual machine fails if it contains an ampersand symbol in the names of its virtual disks.
    • [ABR-173002] Run VM from a backup on a Hyper-V host fails, if the backup is located on the same volume as the path selected for the mounted VM disks.
      • Solution: Select a different volume for the mounted VM disks path. The space will be consumed only for changes generated inside the mounted VM and it will not occupy the entire size of the virtual disk.
    • [ABR-137564] Cross-platform recoveries (when the backup was created not by Agent for Hyper-V) into a new Hyper-V virtual machine by Agent for Hyper-V always produces the Gen 1 version of virtual machine.
    • [ABR-115430] A "backup is missing for X days" alert is activated even if the backup plan is not scheduled, but has this alert option enabled in its settings.
    • [ABR-104081] A VM replication plan may fail due to network disconnects between source and target ESXi hosts even if the "Error handling" option is enabled.
    • [ABR-85645] Backup of a virtual machine with Active Directory may complete with warning "MFT bitmap is corrupted."
    • [ABR-183082] Recovery of a Linux machine having some volumes with the XFS file system completes with the "Failed to process the boot loader configuration." warning. The machine is bootable despite the warning.
  • Advanced Data Loss Prevention - Early Access Program

    • [KERNEL-10966] Due to user-mode hooking and CET (Control-Flow Enforcement Technology) incompatibility, there are Device control and Data loss prevention functional limitations on workloads with CET enabled CPUs.
    • [DEVLOCK-3192] Content inspection of files with over 100MB size is not performed.
    • [DEVLOCK-2433] Fail to start Acrobat reader while Agent for DLP running.
    • [DEVLOCK-1558] In rare cases, Acronis Cyber Protect Agents setup hangs at upgrading due deadlock in Agent for DLP.
    • [ABR-306459] Backup finished with error "A device attached to the system is not functioning" on specified machine.

Management Portal and Platform Core

  • The read-only role is available for selection while customer tenant is in Cyber Backup - Standard and Cyber Protect - Standard editions, yet it should not be due to licensing limitations.
  • [ABR-136810] An unclear error is shown if a destination tenant was not found while moving a tenant.
  • [ABR-136694] The "Bad request" message appears if a large number is specified for the Storage quota.
  • [ABR-203902] The error message "The number of registered and deleted storage registrations exceeds 50" is shown during storage re-registration.
  • [ABR-203243] Logout is done correctly while a user is logged in via a branded URL; however, logout is not done for a non-branded URL.
  • [ABR-173628] Active Directory Connector - mapping is not saved when one or more Distinguished Names (DNs) are invalid.
  • [ABR-131711] Lack of salutation text in the "Quota exceeded" email notification.
  • [PLTFRM-2340] The "Tenant was moved" audit event description shows tenant IDs instead of names.
  • [PLTFRM-18229] Improve the error message for the RPC GetRedirect method, in case a customer has no storage.