Release notes for Acronis Cyber Cloud 20.07 Hotfix 1

Release date: July 2020

Overview

With this hotfix release, the Acronis flagship cloud product offers enhancements and addresses the issues found in the previous releases.

Fixed issues

This section describes issues that have been fixed in this update.

Acronis Cyber Protection

• [ADP-9511] Data Protection Map scan failed if some file paths or file extensions contains single quote (`).
• [ABR-278391] Protection plan failed to load for editing.
• [ABR-276995] Specification of a new virtual machine for VMware/Hyper-V recovery failed with "Property 'TargetLocation' cannot be found".
• [ABR-278044] Freshly registered machine did not appear in "All Devices" tab.
• Various performance and stability improvements and fixes.

Known issues and limitations

This section describes issues that are currently known and provides solutions to avoid the issues where possible.

Acronis Cyber Protection

Common

• [PLTFRM-18969] It is not possible to protect Microsoft SQL on a machine with a workstation operating system, in the case Agent for Hyper-V is also installed among local agents.
• [ABR-255521] The number of total runs and successful runs is zero for the Microsoft Office 365 resources.
• [ABR-240431] It is possible to apply an existing protection plan with the "Cloud" backup destination, even if the cloud storage quota was exceeded for a tenant. The plan will fail upon execution.
• [ABR-239197] The protection plan with the enabled Physical Data Shipping option cannot be run if the "Local backup" offering item is disabled for a tenant.
• [ABR-228827] If some backup is removed via the Data Recovery (Web Restore) console, this change is not reflected in the service console while browsing the backup location, until the service console is refreshed.
• [ABR-196710] The backup location on the network share usage is duplicated in the case when there is a different network share with the same name registered as a backup location (shares rotation scenario).
• [ABR-189620] The "Activities summary" widget shows activities out of the defined date "Range" scope (excessive activities may be shown).
• [ABR-184900] Local backup usage is not reported for backups stored on a network share with enabled deduplication.
• [ABR-183764] Local backup usage is not updated for all virtual machine backups after deleting and re-adding a network location.
• [ABR-182313] Local backup usage size is duplicated after reconnecting a locally attached storage (LAS) to a new Agent for VMware (Virtual Appliance).
• [ABR-178648] The installer does not remove/update old libraries if the previous update was interrupted.
• [ABR-154655] The protection plan may have the "Backup succeeded" status, even if this plan is completed with warnings. Alerts and activities still show the proper status of the plan.
• [ABR-133689] Acronis MMS fails to start on the latest version of CentOS 7 that uses the 3.10.0-514.21.2.el7.x86_64 kernel version, due to the specific kernel bug: https://bugzilla.redhat.com/show_bug.cgi?id=1463241.
• [ABR-113452] If a machine was re-registered under a different account without revoking the existing protection plan from it, this plan may still continue to run unexpectedly.
• [ABR-106790] The service console is not shown properly on mobile devices.
• [ABR-252829] Sorting by status is inconsistent and mixes the results in an unpredicted way.

Backup

• [ABR-134234] For a folder that is a junction of another folder, any changes made to the contents of the original data (linked to this junction folder) are not backed up. The problem is not reproduced only when using the backup format v12.
• [ABR-115270] The "[All Profiles Folder]" template in a file level backup does not support a custom profile path.
• [ABR-87244] File-level recovery from a disk/volume backup of NTFS volumes with the enabled native deduplication does not work.

Recovery

• [ABR-190404] It is not possible to recover from the Large Scale Recovery backup produced by the "LSR" tool if the backup is split into multiple separate files (multi-volume).
• [ABR-183082] Recovery of a Linux machine having some volumes with the XFS file system completes with the "Failed to process the boot loader configuration." warning. The machine is bootable despite the warning.
• [ABR-158677] "Intel(R) 82574L Gigabit Network Connection" NIC is not properly recognized by Windows 10 after recovery of an image to a VMware Workstation virtual machine by using the bootable media.
• [ABR-129075] When browsing a folder in a backup during the file-level recovery via the service console, some child folders may not appear in the list after sorting by type if the folder contains many elements. To show all items of the folders, you need to scroll down in order to load the entire content of a parent folder and perform sorting only after that.
• [ABR-127666] Files/folders may still be available for a recovery from backups saved in the cloud, even if these files/folders were removed from a source device and the backups that contain these files were already cleaned up during retention.

Applications

• [ABR-221210] An application-aware agent-less VM backup fails with the "Internal error: Failed to find file 'C:\Users\ADMINI~1\AppData\Local\Temp\AcronisGuestService\output.xml'" error, due to a false positive detection of the Acronis "app_detect.exe" binary as "SONAR.Susplnject!gen5" malware by Norton Security Deluxe and/or Symantec Endpoint Protection antiviruses installed inside the virtual machine.
• [ABR-162925] Application items (databases and/or mailboxes) cannot be recovered from the application-aware entire machine backup if the databases are located on mount points (the database path is redirected to another location).
• [ABR-74984] The "Next backup" time is not displayed for a machine that has only application-level protection plans applied to it.

macOS

• [ABR-207057] The Bulgarian language is missing in the "Recovery HD" menu (bootable media for Mac), due to a lack of support of the Bulgarian language in macOS.
• [ABR-141823] There are incorrect backup items in a protection plan after updating Mac OS X to 10.13 High Sierra with conversion from HFS+ to APFS (some backup items are missing).
• [ABR-137886] Backing up Mac with Apple RAID configured fails with the "No volumes were found when processing the 'Fixed Volumes' template" error. Apple RAIDs are not supported.

Virtualization

• [ABR-242166] An application-aware backup of a Hyper-V virtual machine may fail when executing the WMI query, with the "WMI 'ExecQuery' failed executing query." or "Failed to create a new process via WMI" errors, when the backup is performed on a host under a high load, due to no response from WMI.
• [ABR-235983] A protection plan using policy rules such as "/dev/sdaX" or "/sdaX" applied to a VMware or Hyper-V virtual machine fails with the "Nothing to back up. The operation has been terminated." error, when performed by Agent for VMware/Hyper-V.
• [ABR-234935] There are duplicated activities in the Activities summary, after the backup of a virtual machine running on a Hyper-V cluster.
• [ABR-234935] An incorrect number of Total runs/Number of successful runs for a Hyper-V cluster is shown on the Operations tab.
• [ABR-234935] The number of email notifications is equal to the number of Hyper-V cluster nodes for one VM backup activity.
• [ABR-206940] Backing up a Hyper-V virtual machine located on a CSV volume may block moving this CSV volume to a different Hyper-V node, in some cases.
• [ABR-204800] Agent for VMware (Windows) installed on Windows Server 2019 cannot use the "Direct SAN Access" backup mode if it is connected to VMware vSphere version 6.7 and the datastore is connected via iSCSI.
• [ABR-192213] VMware virtual machines with an empty "vc.uuid" (InstanceUUID) vSphere property are not listed in the service console.
• [ABR-189882] Backup of a Hyper-V virtual machine fails if it contains an ampersand symbol in the names of its virtual disks.
• [ABR-173002] Run VM from a backup on a Hyper-V host fails, if the backup is located on the same volume as the path selected for the mounted VM disks.
• Solution: select a different volume for the mounted VM disks path. The space will be consumed only for changes generated inside the mounted VM and it will not occupy the entire size of the virtual disk.
• [ABR-137564] Cross-platform recoveries (when the backup was created not by Agent for Hyper-V) into a new Hyper-V virtual machine by Agent for Hyper-V always produces the Gen 1 version of virtual machine.
• [ABR-115430] A "backup is missing for X days" alert is activated even if the backup plan is not scheduled, but has this alert option enabled in its settings.
• [ABR-104081] A VM replication plan may fail due to network disconnects between source and target ESXi hosts even if the "Error handling" option is enabled.
• [ABR-100551] Backup of a Linux virtual machine running on Hyper-V 2019 always fails over to crash-consistent snapshots, due to a Microsoft limitation (inability to create production checkpoints for Linux virtual machines).
• [ABR-95961] A backup task periodically fails on snapshot creation for some Virtuozzo containers after some time on a host with a high load.
• [ABR-85645] Backup of a virtual machine with Active Directory may complete with warning "MFT bitmap is corrupted."

Management Portal

• The read-only role is available for selection while a customer tenant is created in the Cyber Backup - Standard and Cyber Protect - Standard editions, yet it should not be due to the licensing limitations.
• [ABR-138058] Sending backup notifications is turned off after disabling and then returning back the Cyber Protection role to a user.
• [ABR-137174] The Overview page does not support screen resolution of 1024 pixels or less in width.
• [ABR-136810] An unclear error is shown if a destination tenant was not found while moving a tenant.
• [ABR-136694] The "Bad request" message appears if a large number is specified for the Storage quota.
• [ABR-137537] Turning off the administrator role for a user does not turn off all notification settings.
• [ABR-203902] The error message "The number of registered and deleted storage registrations exceeds 50" is shown during storage re-registration.
• [ABR-203243] Logout is done correctly while a user is logged in via a branded URL; however, logout is not done for a non-branded URL.
• [ABR-173628] (Aсtive Directory Connector) Mapping is not saved when one or more Distinguished Names (DNs) are invalid.
• [ABR-159085] A broken page is shown after login to the Backup app for Android.
• [ABR-131711] Lack of salutation text in the "Quota exceeded" email notification.
• [PLTFRM-4] It is possible to create a tenant with the name having only spaces.
• [PLTFRM-2335][PLTFRM-19133] The Audit log is not loaded after drill-down to a child tenant in certain circumstances.
• [PLTFRM-20333] A Hyper-V host may consume two "Server" licenses, in cases when it is backed up as a physical machine and there are also VMs or Microsoft applications running on this host and which are backed up by other types of backup agents.
• [PLTFRM-20414] Compute points usage from the original edition is not displayed for a customer in the report after the edition switch and tenant move, for example, when the edition is switched from Standard to Disaster Recovery.
• [PLTFRM-2340] The "Tenant was moved" audit event description shows tenant IDs instead of names.
• [PLTFRM-18229] Improve the error message for the RPC GetRedirect method, in case a customer has no storage.